-
Delay more than an hourHaverhill Line Train 206 (8:25 am from Haverhill) is operating approximately 1 hour 20 minutes behind schedule Bradford and North Station due to a signal issue.Affected direction:
InboundUpdated: 9/22/2023 10:00 AM -
Delay up to 20 minutesHaverhill Line Train 208 (10:00 am from Haverhill) is expected to depart Haverhill 10-20 minutes behind schedule due to a signal issue.Affected direction:
InboundUpdated: 9/22/2023 9:30 AM -
Delay up to 15 minutesLowell Line Train 310 (8:50 am from Lowell) is operating 5-15 minutes behind schedule between North Billerica and North Station due to a signal issue.Affected direction:
Inbound
Affected stops:
Wilmington
Anderson/Woburn
Wedgemere
West Medford
North StationUpdated: 9/22/2023 9:10 AM -
Delay up to 15 minutesLowell Line Train 312 (9:30 am from Lowell) is operating 5-15 minutes behind schedule between North Billerica and North Station due to an earlier signal issue.Affected direction:
Inbound
Affected stops:
Wilmington
Anderson/Woburn
Wedgemere
West Medford
North StationUpdated: 9/22/2023 9:49 AM
Upcoming Holidays
- No upcoming holidays
Weekends
Today
August 2022 | ||||||
Sun | Mon | Tue | Wed | Thu | Fri | Sat |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | |
7 | 8 | 9 | 10 | 11 | 12 | 13 |
14 | 15 | 16 | 17 | 18 | 19 | 20 |
21 | 22 | 23 | 24 | 25 | 26 | 27 |
28 | 29 | 30 | 31 | 1 | 2 | 3 |
4 | 5 | 6 | 7 | 8 | 9 | 10 |
Weekends
Today
August 9, 2022 is outside of our current schedule.
We can only provide trip data for the Fall schedule, valid until December 16, 2023.
Icon Key
Bicycles are allowed on trains with the bicycle symbol below the train number.
Passengers must tell the conductor that they wish to leave. Passengers waiting to board
must be visible on the platform for the train to stop.
The train may leave ahead of schedule at these stops.
At stations with multiple tracks outside of North, South, Back Bay, and Ruggles Stations, inbound trains board from Track 2, and outbound trains board from Track 1 unless otherwise specified. Scheduled track changes will be denoted by the symbol. Check T-Alerts for real-time track changes.