Framingham/Worcester
-
Service Change OngoingAshland station will re-open on Saturday, December 23rd as the critical improvement work is concluding. A free shuttle bus operates between Ashland and Framingham to connect with Worcester Line trains through Friday, December 22nd.Buses pick up passengers on the Track 2/inbound side at Ashland except:
-on Friday, December 1st, buses will pick up-drop off at the intersection of Memorial Drive and West Union Street
-from Saturday, December 2nd, through Monday, December 4th, buses will pick up & drop off passengers on Pleasant Street, at the entrance of the parking lot north of the station.Updated: 12/1/2023 1:43 PM -
Delay up to 15 minutesWorcester Line Train 514 (10:00 am from Worcester) is operating 5-15 minutes behind schedule between Wellesley Square and South Station.Affected direction:
Inbound
Affected stops:
Wellesley Square
Wellesley Hills
Wellesley Hills
Wellesley Farms
Wellesley Farms
Auburndale
West Newton
Newtonville
Boston Landing
Boston Landing
Lansdowne
Back Bay
South StationUpdated: 12/8/2023 11:06 AM
Upcoming Holidays
Weekends
Holidays
Today
December 2021 | ||||||
Sun | Mon | Tue | Wed | Thu | Fri | Sat |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | |||
5 | 6 | 7 | 8 | 9 | 10 | 11 |
12 | 13 | 14 | 15 | 16 | 17 | 18 |
19 | 20 | 21 | 22 | 23 | 24 | 25 |
26 | 27 | 28 | 29 | 30 | 31 | 1 |
2 | 3 | 4 | 5 | 6 | 7 | 8 |
Weekends
Holidays
Today
December 13, 2021 is outside of our current schedule.
We can only provide trip data for the Fall schedule, valid until December 16, 2023.
Icon Key
Bicycles are allowed on trains with the bicycle symbol below the train number.
Passengers must tell the conductor that they wish to leave. Passengers waiting to board
must be visible on the platform for the train to stop.
The train may leave ahead of schedule at these stops.
At stations with multiple tracks outside of North, South, Back Bay, and Ruggles Stations, inbound trains board from Track 2, and outbound trains board from Track 1 unless otherwise specified. Scheduled track changes will be denoted by the symbol. Check T-Alerts for real-time track changes.